The L.P. Cylinder
is a 9 1/2" long x Ø3 1/2"
"JACKARNO" boilder - (Jack
Parisson) made in Australia! The end
caps are spun aluminium S1C (condition
0) of my own design which fit OVER
the boiler and are fitted with 6mm
(System 236) bush wheels and special
threaded wheel discs to eliminate
the nuts. The 1/4" square barley
twist handrail stanchions and corner
Ball fittings are also my own design.
The handrails are 8 SWG radio control
wire from a model shop which is Meccano
size which can be 'polished' in the
lathe after cutting to required length.